Tweet
در خواست همکاری در آموزش هکینتاش Niresh12495 Mac os x 10.7.3 All Pcs و ترجمه قسمت فلش بوت در ویندوز !!!!!
با سلام و عرض ادب خدمت همه کسایی که دارن زحمت میکشن تا امثال منو که 1 هفته دارم زور می زنم تا هکینتاش نصب کنمرو راهنمایی کنند
اگه امکان داره آموزش فلش بوت رو که خود Niresh12495 داخل فایل دانلود شده موجود هست این آموزش فلش بوت در ویندوز:
اگه امکان داره آموزش فلش بوت رو که خود Niresh12495 داخل فایل دانلود شده موجود هست این آموزش فلش بوت در ویندوز:Windows Users Don’t Have Direct Option to boot From Flash drive anyhow
I found an alternate method
This Time a Little Different
You Need Two Pen Drives to Get Installation Working
a one 2GB or + and another 8GB or +
Extract and Copy The Contents of MakeUSB to
C:\Windows\System32\
Open Command Prompt (cmd) Start --> Run --> Type "cmd" --> Press Enter
now remove all external medias and Connect The 2GB+ PenDrive
Make Sure The PenDrives are Empty
type makeusb X:
where X is The Volume Name of 2GB+ Pen Drive
Now Eject and Reinsert The 2GB + Pen Drive
Now Copy The Contents of "EFI" Folder to The 2GB+ PenDrive
Then Eject The PenDrive
Now Insert The 8GB+ Volume
Extract usbit.zip
Copy the Contents of the zip to C:\Windows\System32
Open Command Prompt (CMD)
type "usbitcmd l"
Note The Device Number of The 8GB+ PenDrive (Example It Will Look Like 2248)
now restore the ISO to 8GB+ PenDrive Using The Following Command
usbitcmd r "Device Number of The 8GB+ PenDrive" “Path of Niresh12495-Lion-10.7.3-V2.iso” /d
If You Can't Follow The Above Guide Then Google it for USBIT The Guide
Now Restart and Boot From The 2GB+ Pen Drive
Then Insert The Other PenDrive
Press F5
Select The Volume Named "Niresh12495-Lion-10.7.3-V2"
این آموزش رو ترجمه کنید تا مشکل من حل بشه این درخواست رو ازتون دارم که در اسرع وقت به این موضوع رسیدگی کنید چون دارم دیووووووونه میشمI found an alternate method
This Time a Little Different
You Need Two Pen Drives to Get Installation Working
a one 2GB or + and another 8GB or +
Extract and Copy The Contents of MakeUSB to
C:\Windows\System32\
Open Command Prompt (cmd) Start --> Run --> Type "cmd" --> Press Enter
now remove all external medias and Connect The 2GB+ PenDrive
Make Sure The PenDrives are Empty
type makeusb X:
where X is The Volume Name of 2GB+ Pen Drive
Now Eject and Reinsert The 2GB + Pen Drive
Now Copy The Contents of "EFI" Folder to The 2GB+ PenDrive
Then Eject The PenDrive
Now Insert The 8GB+ Volume
Extract usbit.zip
Copy the Contents of the zip to C:\Windows\System32
Open Command Prompt (CMD)
type "usbitcmd l"
Note The Device Number of The 8GB+ PenDrive (Example It Will Look Like 2248)
now restore the ISO to 8GB+ PenDrive Using The Following Command
usbitcmd r "Device Number of The 8GB+ PenDrive" “Path of Niresh12495-Lion-10.7.3-V2.iso” /d
If You Can't Follow The Above Guide Then Google it for USBIT The Guide
Now Restart and Boot From The 2GB+ Pen Drive
Then Insert The Other PenDrive
Press F5
Select The Volume Named "Niresh12495-Lion-10.7.3-V2"
از فروم عالیتون تشکر میکنم همچنین از جوون هایی که دارن اینجا زحمت میکشن تا بقیه رو خوشحال کنند!!!!!!
نظر